EPM570GT100I5N

EPM570GT100I5N Overview

The mobile phone network has 440 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).In the TQFPpackage, you will find it.As you can see, this device has 76 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 1.8V volts.The part is included in Programmable Logic Devices.There are 100 pins on the chip.The device can also be used to find [0].High efficiency requires a voltage supply of [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.The device has a pinout of [0].There is a maximum supply voltage of 1.89V.With a minimal supply voltage of [0], it operates.Currently, there are 76 Programmable I/Os available.This frequency is 1.8797GHz.In order to operate properly, the operating temperature should be higher than -40°C.It is recommended that the operating temperature be lower than 100°C.57logic blocks (LABs) make up this circuit.The fundamental building block consists of 570logic elements/cells.It is recommended that the maximum frequency is less than 0.Devices are equipped with a memory capacity of 1kBfor storing programs and data.

EPM570GT100I5N Features

TQFP package
76 I/Os
100 pin count
100 pins
57 logic blocks (LABs)

EPM570GT100I5N Applications

There are a lot of Altera EPM570GT100I5N CPLDs applications.

• I/O expansion
• Preset swapping
• State machine control
• Code converters
• Configurable Addressing of I/O Boards
• Reset swapping
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• Address decoding