EPM570T144C3

EPM570T144C3 Overview

This network has 440macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a TQFP package containing it.The device is programmed with 116 I/O ports.There are 144 terminations programmed into the device.Its terminal position is QUAD.It is powered by a voltage of 2.5V volts.There is a part included in Programmable Logic Devices.Bulkshould be used for packaging the chip.It is equipped with 144 pin count.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].It is mounted by Surface Mount.There are 144pins on it.In this case, the maximum supply voltage is 3.6V.In order for it to operate, a supply voltage of 2.375Vis required.Currently, there are 116 Programmable I/Os available.A frequency of 3.01205GHzcan be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be lower than 85°C.The program consists of 57 logic blocks (LABs).A fundamental building block consists of 570logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.Using the devices' 1kBmemory, programs and data can be stored.

EPM570T144C3 Features

TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)

EPM570T144C3 Applications

There are a lot of Altera EPM570T144C3 CPLDs applications.

• Complex programmable logic devices
• DMA control
• Address decoders
• Preset swapping
• Software-Driven Hardware Configuration
• Discrete logic functions
• State machine control
• Reset swapping
• Parity generators
• White goods (Washing, Cold, Aircon ,...)