EPM570T144C5N

EPM570T144C5N Overview

There are 440 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the TQFP package.In this case, there are 116 I/Os programmed.The device is programmed with 144 terminations.Its terminal position is QUAD.Power is supplied by a voltage of 2.5V volts.There is a part in the family [0].It is recommended that the chip be packaged by Bulk.In this chip, the 144pins are programmed.Additionally, this device is capable of displaying [0].For high efficiency, the supply voltage should be maintained at [0].In general, it is recommended to store data in [0].The electronic part is mounted by Surface Mount.The 144pins are designed into the board.There is a maximum supply voltage of 3.6Vwhen the device is operating.Initially, it requires a voltage of 2.375Vas the minimum supply voltage.There are 116 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 304MHzcan be achieved.In order to operate, the temperature should be higher than 0°C.A temperature lower than 85°Cis recommended for operation.There are 57 logic blocks (LABs) in its basic building block.In order to form a fundamental building block, there are 570logic elements/cells.Maximum frequency should be less than 304MHz.The devices contain a memory of 1kBfor storing programs and data.

EPM570T144C5N Features

TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)

EPM570T144C5N Applications

There are a lot of Altera EPM570T144C5N CPLDs applications.

• Power Meter SMPS
• Software-Driven Hardware Configuration
• POWER-SAVING MODES
• ON-CHIP OSCILLATOR CIRCUIT
• Voltage level translation
• ROM patching
• Field programmable gate
• Power up sequencing
• Pattern recognition
• Bootloaders for FPGAs