EPM570ZM144C6N

EPM570ZM144C6N Overview

A mobile phone network consists of 440macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).It is contained in package [0].It is programmed to terminate devices at [0].This electrical part has a terminal position of BOTTOMand is connected to the ground.An electrical supply voltage of 1.8V is used to power it.This part is included in Programmable Logic Devices.It is programmed with 144 pins.This device also displays [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 144 pins.This device operates at a voltage of 1.89Vas its maximum supply voltage.The device is designed to operate with a minimal supply voltage of 1.71VV.A programmable I/O count of 116 has been recorded.In this case, 1.97628GHzis the frequency that can be achieved.Operating temperatures should be higher than 0°C.It is recommended to keep the operating temperature below 85°C.It consists of 57 logic blocks (LABs).As a fundamental building block, there are 570 logic elements/cells.It is recommended that the maximal frequency be less than 0.The devices contain a memory of 1kBfor storing programs and data.

EPM570ZM144C6N Features

TFBGA package
144 pin count
144 pins
57 logic blocks (LABs)

EPM570ZM144C6N Applications

There are a lot of Altera EPM570ZM144C6N CPLDs applications.

• Portable digital devices
• Timing control
• Wide Vin Industrial low power SMPS
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Software Configuration of Add-In Boards
• Protection relays
• DMA control
• D/T registers and latches
• Address decoding
• Network Interface Card (NIC) and Host Bus Adapter (HBA)