EPM7032AELC44-10

EPM7032AELC44-10 Overview

There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the PLCC package.It is programmed with 36 I/Os.It is programmed to terminate devices at [0].Its terminal position is QUAD.It is powered by a voltage of 3.3V volts.There is a part included in Programmable Logic Devices.In this chip, the 44pins are programmed.As a building block for digital circuits, there are 600gates.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.A total of 44pins are provided on this board.In this case, the maximum supply voltage is 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 36.In this case, 125MHzis the frequency that can be achieved.There should be a temperature above 0°Cat the time of operation.Ideally, the operating temperature should be below 70°C.There are 2 logic blocks (LABs) in its basic building block.The maximal frequency should be lower than 227.3MHz.A programmable logic type is categorized as EE PLD.

EPM7032AELC44-10 Features

PLCC package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

EPM7032AELC44-10 Applications

There are a lot of Altera EPM7032AELC44-10 CPLDs applications.

• Synchronous or asynchronous mode
• Wide Vin Industrial low power SMPS
• PLC analog input modules
• Battery operated portable devices
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• Discrete logic functions
• I/O PORTS (MCU MODULE)
• Custom shift registers
• Digital systems
• Software Configuration of Add-In Boards