EPM7032AETC44-10

EPM7032AETC44-10 Overview

The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the TQFP package.As a result, it has 36 I/O ports programmed.Terminations of devices are set to [0].This electrical part has a terminal position of QUADand is connected to the ground.Power is supplied by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.As a result, it is packaged as Bulk.44pins are programmed on the chip.If this device is used, you will also be able to find [0].For digital circuits, there are 600gates. These devices serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].A Surface Mountis mounted on this electronic component.44pins are included in its design.In this case, the maximum supply voltage is 3.6V.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 36programmable I/Os.In this case, 125MHzis the frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 70°C.There are 2logic blocks (LABs) that make up its basic building block.It is recommended that the maximal frequency be lower than 227.3MHz.A programmable logic type can be categorized as EE PLD.

EPM7032AETC44-10 Features

TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

EPM7032AETC44-10 Applications

There are a lot of Altera EPM7032AETC44-10 CPLDs applications.

• I/O PORTS (MCU MODULE)
• INTERRUPT SYSTEM
• Preset swapping
• Digital designs
• Cross-Matrix Switch
• Bootloaders for FPGAs
• ToR/Aggregation/Core Switch and Router
• Custom state machines
• Parity generators
• Random logic replacement