EPM7032AETI44-7

EPM7032AETI44-7 Overview

The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a TQFP package containing it.As a result, it has 36 I/O ports programmed.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 3.3V voltage supply for this device.There is a part in the family [0].Bulkis the packaging method.There are 44pins on the chip.There are 600 gates, which are devices that acts as a building block for digital circuits. For high efficiency, the supply voltage should be maintained at [0].For data storage, EEPROMis adopted.This device is mounted by Surface Mount.The device has a pinout of [0].A maximum voltage of 3.6Vis required for operation.The minimal supply voltage is 3V.In total, there are 36programmable I/Os.There is a maximum frequency of 166.67MHz.There should be a temperature above -40°Cat the time of operation.There should be a temperature below 85°Cat the time of operation.In total, it contains 2 logic blocks (LABs).A maximum frequency of less than 227.3MHzis recommended.There are several types of programmable logic that can be categorized as EE PLD.There is an output of 36configured on the device.

EPM7032AETI44-7 Features

TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
36 outputs

EPM7032AETI44-7 Applications

There are a lot of Altera EPM7032AETI44-7 CPLDs applications.

• Reset swapping
• Random logic replacement
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• ON-CHIP OSCILLATOR CIRCUIT
• USB Bus
• Multiple DIP Switch Replacement
• Wide Vin Industrial low power SMPS
• TIMERS/COUNTERS
• Multiple Clock Source Selection
• Dedicated input registers