EPM7032BTC44-3

EPM7032BTC44-3 Overview

Currently, there are 32 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the TQFPpackage, you will find it.There are 36 I/Os on the board.The device is programmed with 44 terminations.This electrical component has a terminal position of 0.A voltage of 2.5V is used as the power supply for this device.This part is part of the family [0].There are 44 pins on the chip.This device also displays [0].A digital circuit can be constructed using 600gates.For high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.In this case, it is mounted by Surface Mount.The pins are [0].In this case, the maximum supply voltage is 2.625V.Despite its minimal supply voltage of [0], it is capable of operating.There can be 333.33MHz frequency achieved.It is recommended that the operating temperature exceeds 0°C.Temperatures should be lower than 70°C when operating.Its basic building block is composed of 2 logic blocks (LABs).Programmable logic types can be divided into EE PLD.

EPM7032BTC44-3 Features

TQFP package
36 I/Os
44 pin count
44 pins
2 logic blocks (LABs)

EPM7032BTC44-3 Applications

There are a lot of Altera EPM7032BTC44-3 CPLDs applications.

• Portable digital devices
• LED Lighting systems
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Programmable polarity
• Handheld digital devices
• Timing control
• Custom state machines
• Programmable power management
• Complex programmable logic devices
• Custom shift registers