EPM7032STC44-10F

EPM7032STC44-10F Overview

There are 32 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].There are 36 I/Os programmed in it.It is programmed that device terminations will be 44 .The terminal position of this electrical component is QUAD.There is 5V voltage supply for this device.This part is part of the family [0].As a result, it is packaged as Bulk.The chip is programmed with 44 pins.If this device is used, you will also be able to find [0].In digital circuits, 600gates serve as building blocks.In order to achieve high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 44 pins on the device.A maximum supply voltage of 5.25Vis used in its operation.It operates with the minimal supply voltage of 4.75V.It runs on 5Vvolts of power.There is a maximum frequency of 125MHz.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.There are 2 logic blocks (LABs) in its basic building block.Types of programmable logic are divided into EE PLD.

EPM7032STC44-10F Features

TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)

EPM7032STC44-10F Applications

There are a lot of Altera EPM7032STC44-10F CPLDs applications.

• PULSE WIDTH MODULATION (PWM)
• Pattern recognition
• D/T registers and latches
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Bootloaders for FPGAs
• I2C BUS INTERFACE
• Wide Vin Industrial low power SMPS
• Protection relays
• Software Configuration of Add-In Boards
• Boolean function generators