EPM7032STC44-6

EPM7032STC44-6 Overview

The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).TQFPis the package in which it resides.As a result, it has 36 I/O ports programmed.The device is programmed with 44 terminations.QUADis the terminal position of this electrical part.An electrical supply voltage of 5V is used to power it.It is a part of family [0].Bulkshould be used to package the chip.There are 44 pins on the chip.Additionally, this device is capable of displaying [0].As a building block for digital circuits, there are 600gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].Surface Mountis the mounting point of this electronic part.44pins are included in its design.In this case, the maximum supply voltage is 5.25V.It is powered by 4.75Vas its minimum supply voltage.It runs on 5Vvolts of power.This can be achieved at a frequency of 200MHz.It is recommended that the operating temperature be greater than 0°C.There should be a temperature below 70°Cat the time of operation.In total, it contains 2 logic blocks (LABs).This kind of FPGA is composed of EE PLD.

EPM7032STC44-6 Features

TQFP package
36 I/Os
44 pin count
44 pins
5V power supplies
2 logic blocks (LABs)

EPM7032STC44-6 Applications

There are a lot of Altera EPM7032STC44-6 CPLDs applications.

• Digital designs
• Battery operated portable devices
• Address decoders
• Bootloaders for FPGAs
• ON-CHIP OSCILLATOR CIRCUIT
• D/T registers and latches
• Pattern recognition
• Wide Vin Industrial low power SMPS
• Configurable Addressing of I/O Boards
• State machine design