EPM7064AEFC100-10

EPM7064AEFC100-10 Overview

There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.There are 68 I/Os programmed in it.It is programmed that device terminations will be 100 .This electrical part has a terminal position of BOTTOMand is connected to the ground.There is 3.3V voltage supply for this device.There is a part in the family [0].There are 100 pins on the chip.In digital circuits, there are 1250gates, which act as a basic building block.It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency.For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.There are 100 pins on the device.In this case, the maximum supply voltage is 3.6V.Initially, it requires a voltage of 3Vas the minimum supply voltage.Programmable I/Os are counted up 68.You can achieve 125MHzfrequencies.In order to operate, the temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.In total, it contains 4 logic blocks (LABs).The maximal frequency should be lower than 222.2MHz.A programmable logic type is classified as EE PLD.

EPM7064AEFC100-10 Features

FBGA package
68 I/Os
100 pin count
100 pins
4 logic blocks (LABs)

EPM7064AEFC100-10 Applications

There are a lot of Altera EPM7064AEFC100-10 CPLDs applications.

• Handheld digital devices
• ON-CHIP OSCILLATOR CIRCUIT
• Software-driven hardware configuration
• Preset swapping
• Random logic replacement
• Digital designs
• State machine control
• Address decoders
• Boolean function generators
• Protection relays