EPM7064SLC44-5N

EPM7064SLC44-5N Overview

There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 36 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.A voltage of 5V is used as the power supply for this device.This part is part of the family [0].It is packaged in the way of Bulk.A chip with 44pins is programmed.There are 1250 gates, which are devices that acts as a building block for digital circuits. It is recommended to store data in [0].Surface Mountmounts this electronic component.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.A minimum supply voltage of 3V is required for this device to operate.It runs on 5Vvolts of power.There are 36 programmable I/Os in this system.In this case, 250MHzis the frequency that can be achieved.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.There are 4 logic blocks (LABs) in its basic building block.It is recommended that the maximal frequency be less than 0.A programmable logic type is classified as EE PLD.

EPM7064SLC44-5N Features

PLCC package
36 I/Os
44 pin count
44 pins
5V power supplies
4 logic blocks (LABs)

EPM7064SLC44-5N Applications

There are a lot of Altera EPM7064SLC44-5N CPLDs applications.

• Software Configuration of Add-In Boards
• Custom shift registers
• Auxiliary Power Supply Isolated and Non-isolated
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• PULSE WIDTH MODULATION (PWM)
• Complex programmable logic devices
• Storage Cards and Storage Racks
• POWER-SAVING MODES
• Portable digital devices
• Random logic replacement