EPM7064SLC84-5N

EPM7064SLC84-5N Overview

There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is part of the PLCC package.The device has 68inputs and outputs.The termination of a device is set to [0].This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 5V volts.It belongs to the family [0].In this chip, the 84pins are programmed.For digital circuits, there are 1250gates. These devices serve as building blocks.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].Surface Mountis used to mount this electronic component.There are 84pins on it.There is a maximum supply voltage of 5.25Vwhen the device is operating.It is powered by 4.75Vas its minimum supply voltage.There are 68 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. There can be 250MHz frequency achieved.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended that the operating temperature be below 70°C.Its basic building block is composed of 4 logic blocks (LABs).There should be a lower maximum frequency than 175.4MHz.It is possible to classify programmable logic as EE PLD.

EPM7064SLC84-5N Features

PLCC package
68 I/Os
84 pin count
84 pins
4 logic blocks (LABs)

EPM7064SLC84-5N Applications

There are a lot of Altera EPM7064SLC84-5N CPLDs applications.

• Address decoders
• White goods (Washing, Cold, Aircon ,...)
• Field programmable gate
• Complex programmable logic devices
• Multiple Clock Source Selection
• STANDARD SERIAL INTERFACE UART
• DDC INTERFACE
• State machine control
• Wide Vin Industrial low power SMPS
• LED Lighting systems