EPM7096QC100-15

EPM7096QC100-15 Overview

The mobile phone network has 96 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a PQFP package.The device is programmed with 76 I/O ports.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 5V.There is a part included in Programmable Logic Devices.The chip is programmed with 100 pins.This device can also display [0].In digital circuits, 1800gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, EEPROMwill be used to store the data.In this case, Surface Mountis used to mount the electronic component.There are 100 pins embedded in the device.There is a maximum supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.Programmable I/Os are counted up 76.It is recommended that the operating temperature exceeds 0°C.Ideally, the operating temperature should be below 70°C.There are 6logic blocks (LABs) that make up its basic building block.There should be a lower maximum frequency than 125MHz.There are several types of programmable logic that can be categorized as EE PLD.

EPM7096QC100-15 Features

PQFP package
76 I/Os
100 pin count
100 pins
6 logic blocks (LABs)

EPM7096QC100-15 Applications

There are a lot of Altera EPM7096QC100-15 CPLDs applications.

• ROM patching
• Reset swapping
• Digital systems
• I2C BUS INTERFACE
• Portable digital devices
• High speed graphics processing
• Software Configuration of Add-In Boards
• Voltage level translation
• Cross-Matrix Switch
• Multiple Clock Source Selection