EPM7128AEFC100-7N

EPM7128AEFC100-7N Overview

There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a FBGA package containing it.In this case, there are 84 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.100pins are programmed on the chip.It is also possible to find YESwhen using this device.For digital circuits, there are 2500gates. These devices serve as building blocks.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].In this case, Surface Mountis used to mount the electronic component.A total of 100pins are provided on this board.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.The minimal supply voltage is 3V.A total of 84Programmable I/Os are present.A frequency of 166.67MHzcan be achieved.There should be a temperature above 0°Cat the time of operation.There should be a temperature below 70°Cat the time of operation.The system consists of 8 logic blocks (LABs).It is recommended that the maximum frequency is less than 0.Types of programmable logic are divided into EE PLD.

EPM7128AEFC100-7N Features

FBGA package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

EPM7128AEFC100-7N Applications

There are a lot of Altera EPM7128AEFC100-7N CPLDs applications.

• Software-driven hardware configuration
• Parity generators
• Reset swapping
• PLC analog input modules
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• Dedicated input registers
• Discrete logic functions
• DDC INTERFACE
• Programmable polarity
• Random logic replacement