EPM7128SLC84-10N

EPM7128SLC84-10N Overview

The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The item is enclosed in a PLCC package.There are 68 I/Os programmed in it.84terminations are programmed into the device.There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 5V volts.This part is in the family [0].A chip with 84pins is programmed.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.As a building block for digital circuits, there are 2500gates.In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.84pins are included in its design.There is a maximum supply voltage of 5.25Vwhen the device is operating.A minimum supply voltage of 4.75V is required for it to operate.A programmable I/O count of 68 has been recorded.There is a maximum frequency of 100MHz.It is recommended that the operating temperature be higher than 0°C.Temperatures should be lower than 70°C when operating.The system consists of 8 logic blocks (LABs).It should be below 147.1MHzat the maximal frequency.This kind of FPGA is composed of EE PLD.

EPM7128SLC84-10N Features

PLCC package
68 I/Os
84 pin count
84 pins
8 logic blocks (LABs)

EPM7128SLC84-10N Applications

There are a lot of Altera EPM7128SLC84-10N CPLDs applications.

• Power Meter SMPS
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Power up sequencing
• Portable digital devices
• Auxiliary Power Supply Isolated and Non-isolated
• Programmable power management
• Address decoding
• USB Bus
• Digital systems
• Bootloaders for FPGAs