EPM7128SQC160-15

EPM7128SQC160-15 Overview

There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The product is contained in a PQFP package.It is programmed with 100 I/Os.There is a 160terminations set on devices.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.It belongs to the family [0].Chips are programmed with 160 pins.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.It is possible to construct digital circuits using 2500gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].Surface Mountis used to mount this electronic component.There are 160pins on it.In this case, the maximum supply voltage is 5.25V.A minimum supply voltage of 4.75V is required for it to operate.There are 100 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. This can be achieved at a frequency of 100MHz.In order to operate, the temperature should be higher than 0°C.It is recommended that the operating temperature be lower than 70°C.In its simplest form, it consists of 8 logic blocks (LABs).It should be below 147.1MHzat the maximal frequency.Programmable logic types can be divided into EE PLD.

EPM7128SQC160-15 Features

PQFP package
100 I/Os
160 pin count
160 pins
8 logic blocks (LABs)

EPM7128SQC160-15 Applications

There are a lot of Altera EPM7128SQC160-15 CPLDs applications.

• Complex programmable logic devices
• Custom shift registers
• TIMERS/COUNTERS
• Multiple DIP Switch Replacement
• Synchronous or asynchronous mode
• Interface bridging
• Software-driven hardware configuration
• Bootloaders for FPGAs
• Programmable power management
• Power automation