EPM7128STC100-15

EPM7128STC100-15 Overview

There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the TQFP package.In this case, there are 84 I/Os programmed.100terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.The part belongs to Programmable Logic Devices family.Bulkshould be used to package the chip.It is equipped with 100 pin count.When using this device, CONFIGURABLE I/O OPERATION WITH 3.3V OR 5Vcan also be found.In digital circuits, there are 2500gates, which act as a basic building block.For high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.The electronic component is mounted by Surface Mount.There are 100pins on it.There is a maximum supply voltage of 5.25V.In order for it to operate, a supply voltage of 4.75Vis required.There are 84 programmable I/Os in this system.There is 100MHz frequency that can be achieved.It is recommended that the operating temperature be higher than 0°C.A temperature below 70°Cshould be used as the operating temperature.It is composed of 8 logic blocks (LABs).The maximal frequency should be lower than 147.1MHz.A programmable logic type can be categorized as EE PLD.

EPM7128STC100-15 Features

TQFP package
84 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

EPM7128STC100-15 Applications

There are a lot of Altera EPM7128STC100-15 CPLDs applications.

• Preset swapping
• ToR/Aggregation/Core Switch and Router
• Programmable power management
• DDC INTERFACE
• State machine design
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Timing control
• PLC analog input modules
• Random logic replacement
• Parity generators