EPM7256AEFI100-7N

EPM7256AEFI100-7N Overview

There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).You can find it in package [0].In this case, there are 84 I/Os programmed.Devices are programmed with terminations of [0].The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.A voltage of 3.3V is used as the power supply for this device.There is a part in the family [0].There are 100 pins on the chip.If this device is used, you will also be able to find [0].There are 5000 gates, which are devices that acts as a building block for digital circuits. If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.The device is designed with pins [0].With a maximum supply voltage of [0], it operates.In order for it to operate, a supply voltage of 3Vis required.A total of 84 Programmable I/Os are available.In this case, 166.67MHzis the frequency that can be achieved.Operating temperatures should be higher than 0°C.Temperatures should not exceed 85°C.In its simplest form, it consists of 16 logic blocks (LABs).There should be a lower maximum frequency than 172.4MHz.This kind of FPGA is composed of EE PLD.

EPM7256AEFI100-7N Features

FBGA package
84 I/Os
100 pin count
100 pins
16 logic blocks (LABs)

EPM7256AEFI100-7N Applications

There are a lot of Altera EPM7256AEFI100-7N CPLDs applications.

• INTERRUPT SYSTEM
• Discrete logic functions
• State machine design
• Random logic replacement
• Field programmable gate
• Multiple Clock Source Selection
• State machine control
• POWER-SAVING MODES
• Synchronous or asynchronous mode
• Power Meter SMPS