EPM7256BFC100-10

EPM7256BFC100-10 Overview

There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LBGA package.There are 84 I/Os programmed in it.Devices are programmed with terminations of [0].Its terminal position is BOTTOM.Power is supplied by a voltage of 2.5V volts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].It is mounted in the way of Surface Mount.The MAX? 7000Bseries comprises this type of FPGA.If you use this device, you will also find [0].It is possible to construct digital circuits using 5000gates, which are devices that serve as building blocks.This logic block consists of 16logic elements.The system runs on a power supply of 1.8/3.32.5V watts.The maximal supply voltage (Vsup) reaches 2.625V.The status of input signals is determined by 4dedicated inputs.Voltage supply (Vsup) should be higher than 2.375V.The clock frequency should not exceed 95.2MHz.

EPM7256BFC100-10 Features

100-LBGA package
84 I/Os
The operating temperature of 0°C~70°C TA
1.8/3.32.5V power supplies

EPM7256BFC100-10 Applications

There are a lot of Intel EPM7256BFC100-10 CPLDs applications.

• Pattern recognition
• Synchronous or asynchronous mode
• Digital systems
• White goods (Washing, Cold, Aircon ,...)
• Multiple Clock Source Selection
• Preset swapping
• Dedicated input registers
• Boolean function generators
• ROM patching
• Timing control