EPM7512AEBI256-10

EPM7512AEBI256-10 Overview

There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].There are 212 I/Os on the board.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.There is a BOTTOMterminal position on the electrical part in question.An electrical supply voltage of 3.3V is used to power it.The part belongs to Programmable Logic Devices family.It has 256pins programmed.In digital circuits, there are 10000gates, which act as a basic building block.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].A Surface Mountis mounted on this electronic component.The pins are [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 212.There is 125MHz frequency that can be achieved.The operating temperature should be higher than -40°C.It is recommended to keep the operating temperature below 85°C.The program consists of 32 logic blocks (LABs).It should be below 116.3MHzat the maximal frequency.Programmable logic types can be divided into EE PLD.

EPM7512AEBI256-10 Features

BGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)

EPM7512AEBI256-10 Applications

There are a lot of Altera EPM7512AEBI256-10 CPLDs applications.

• Wide Vin Industrial low power SMPS
• Programmable polarity
• Software-driven hardware configuration
• Protection relays
• Multiple DIP Switch Replacement
• Address decoding
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Digital systems
• STANDARD SERIAL INTERFACE UART
• Code converters