EPM7512AETC144-10N

EPM7512AETC144-10N Overview

There are 512 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A TQFP package contains the item.It is programmed with 120 I/Os.144terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is supplied by a voltage of 3.3V volts.The part is included in Programmable Logic Devices.A chip with 144pins is programmed.A digital circuit is built using 10000gates.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].This electronic part is mounted in the way of Surface Mount.44pins are included in its design.A maximum supply voltage of 3.6Vis used in its operation.The device is designed to operate with a minimal supply voltage of 3VV.Programmable I/Os are counted up 36.This can be achieved at a frequency of 125MHz.It is recommended that the operating temperature be higher than 0°C.Ideally, the operating temperature should be below 70°C.In its simplest form, it consists of 32 logic blocks (LABs).It should be below 116.3MHzat the maximal frequency.A programmable logic type can be categorized as EE PLD.

EPM7512AETC144-10N Features

TQFP package
120 I/Os
144 pin count
44 pins
32 logic blocks (LABs)

EPM7512AETC144-10N Applications

There are a lot of Altera EPM7512AETC144-10N CPLDs applications.

• Auxiliary Power Supply Isolated and Non-isolated
• Programmable polarity
• Code converters
• Synchronous or asynchronous mode
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• PULSE WIDTH MODULATION (PWM)
• Multiple DIP Switch Replacement
• DMA control
• Pattern recognition
• Discrete logic functions