EPM7512BFC256-10

EPM7512BFC256-10 Overview

This network has 512macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is embedded in the FBGA package.In this case, there are 212 I/Os programmed.Devices are programmed with terminations of [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.It is powered by a voltage of 2.5V volts.This part is part of the family [0].A chip with 256pins is programmed.The device can also be used to find [0].The 10000gates serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, Surface Mountis used to mount the electronic component.This board has 256 pins.There is a maximum supply voltage of 2.625V.It operates with the minimal supply voltage of 2.375V.There are 212 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 125MHzcan be achieved.Operating temperatures should be higher than 0°C.Ideally, the operating temperature should be below 70°C.There are 32 logic blocks (LABs) in its basic building block.Maximum frequency should be less than 163.9MHz.This kind of FPGA is composed of EE PLD.

EPM7512BFC256-10 Features

FBGA package
212 I/Os
256 pin count
256 pins
32 logic blocks (LABs)

EPM7512BFC256-10 Applications

There are a lot of Altera EPM7512BFC256-10 CPLDs applications.

• Field programmable gate
• Preset swapping
• Address decoding
• Bootloaders for FPGAs
• Digital systems
• Portable digital devices
• PULSE WIDTH MODULATION (PWM)
• Voltage level translation
• Software-Driven Hardware Configuration
• LED Lighting systems