EPM7512BTC144-7

EPM7512BTC144-7 Overview

There are 512 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is contained in package [0].It is equipped with 120I/O ports.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 2.5V voltage supply for this device.This part is included in Programmable Logic Devices.It is programmed with 144 pins.This device is also capable of displaying [0].The 10000gates serve as building blocks for digital circuits.In order to store data, EEPROMis used.In this case, it is mounted by Surface Mount.The 144pins are designed into the board.A maximum voltage of 3.6Vis required for operation.A minimum supply voltage of 3V is required for it to operate.There is 1.8/3.32.5V power supply available for it.A total of 36programmable I/Os are available.This frequency can be achieved at 166.67MHz.It is recommended that the operating temperature be higher than 0°C.It is recommended to keep the operating temperature below 70°C.It is composed of 32 logic blocks (LABs).The maximal frequency should be lower than 163.9MHz.A programmable logic type can be categorized as EE PLD.

EPM7512BTC144-7 Features

TQFP package
120 I/Os
144 pin count
144 pins
1.8/3.32.5V power supplies
32 logic blocks (LABs)

EPM7512BTC144-7 Applications

There are a lot of Altera EPM7512BTC144-7 CPLDs applications.

• DMA control
• Interface bridging
• Auxiliary Power Supply Isolated and Non-isolated
• Address decoders
• Random logic replacement
• Discrete logic functions
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• ON-CHIP OSCILLATOR CIRCUIT
• INTERRUPT SYSTEM
• Complex programmable logic devices