FCT162823CTPVCTG4

FCT162823CTPVCTG4 Overview

It is embeded in 56-BSSOP (0.295, 7.50mm Width) case. The package Tape & Reel (TR)contains it. As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. A supply voltage of 4.5V~5.5V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74FCTseries comprises this type of FPGA. D latch consists of 2 elements. As a result, it consumes 500μA of quiescent current without being affected by external factors. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74FCT162823, you will find similar parts. The power supply voltage is 5V. There is 4.5pF input capacitance for this T flip flop. It is a member of the FCTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. A total of 56pins are provided on this board. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 18. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. The flip flop has 2embedded ports. If high efficiency is desired, the supply voltage should be kept at 5V. It operates with 9 output lines.

FCT162823CTPVCTG4 Features

Tape & Reel (TR) package
74FCT series
56 pins
18 Bits
5V power supplies

FCT162823CTPVCTG4 Applications

There are a lot of Texas Instruments FCT162823CTPVCTG4 Flip Flops applications.

• Control circuits
• Buffer registers
• Load Control
• Digital electronics systems
• Counters
• Automotive
• Reduced system switching noise
• Common Clocks
• Consumer
• Supports Live Insertion