Products
You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The
basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and
country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.Parameters | |
---|---|
Factory Lead Time | 14 Weeks |
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-WDFN Exposed Pad |
Number of Pins | 8 |
Weight | 151mg |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Published | 2017 |
Series | AccuPower™ |
JESD-609 Code | e4 |
Feature | Power Good, Slew Rate Controlled, Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Resistance | 88mOhm |
Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
Subcategory | Peripheral Drivers |
Max Power Dissipation | 1.25W |
Terminal Position | DUAL |
Number of Functions | 1 |
Supply Voltage | 12V |
Terminal Pitch | 0.65mm |
Base Part Number | FPF2701 |
Number of Outputs | 1 |
Output Type | N-Channel |
Max Output Current | 2A |
Operating Supply Voltage | 36V |
Interface | On/Off |
Nominal Supply Current | 92μA |
Output Configuration | High Side |
Output Current | 2A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Input Type | Non-Inverting |
Turn On Delay Time | 2.7 ms |
Switch Type | General Purpose |
Min Input Voltage | 2.8V |
Max Input Voltage | 36V |
Rise Time | 7.5ms |
Fall Time (Typ) | 1.5 ms |
Nominal Input Voltage | 36V |
Turn-Off Delay Time | 100 μs |
Ratio - Input:Output | 1:1 |
Voltage - Load | 2.8V~36V |
Driver Number of Bits | 1 |
Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
Output Peak Current Limit-Nom | 0.4A |
Rds On (Typ) | 88m Ω |
Max Junction Temperature (Tj) | 125°C |
Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
Ambient Temperature Range High | 85°C |
Height | 800μm |
Length | 3mm |
Width | 3mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The AccuPower? FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. The minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by “hot plugging” loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin.
Fault conditions can be monitored using the error flag pin and/or the power-good pin.
2.8 V to 36 V Input Voltage Range
Typical RDS(ON)=88 m?
0.4 A to 2 A Adjustable Current Limit (Min.)
Slew Rate Controlled
ESD Protected, above 2000 V HBM
Thermal Shutdown
Active LOW Enable
UVLO Protection
Power-Good Output
Motor Drives
Digital Cameras
Consumer Electronics
Industrial
Computing
Hard Disk Drives
Telecom Equipment
Products