Products
You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The
basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and
country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.Parameters | |
---|---|
Factory Lead Time | 14 Weeks |
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-WDFN Exposed Pad |
Number of Pins | 8 |
Weight | 151mg |
Operating Temperature | -40°C~85°C TA |
Packaging | Tape & Reel (TR) |
Published | 2017 |
Series | AccuPower™ |
JESD-609 Code | e4 |
Feature | Power Good, Slew Rate Controlled, Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Resistance | 88mOhm |
Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
Subcategory | Peripheral Drivers |
Max Power Dissipation | 1.25W |
Terminal Position | DUAL |
Terminal Form | NO LEAD |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Number of Functions | 1 |
Supply Voltage | 12V |
Terminal Pitch | 0.65mm |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | FPF2702 |
Number of Outputs | 1 |
Qualification Status | Not Qualified |
Output Type | N-Channel |
Max Output Current | 2A |
Operating Supply Voltage | 36V |
Interface | On/Off |
Output Configuration | High Side |
Output Current | 2A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Input Type | Non-Inverting |
Switch Type | General Purpose |
Min Input Voltage | 2.8V |
Max Input Voltage | 36V |
Nominal Input Voltage | 36V |
Ratio - Input:Output | 1:1 |
Voltage - Load | 2.8V~36V |
Driver Number of Bits | 1 |
Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
Output Peak Current Limit-Nom | 0.4A |
Rds On (Typ) | 88m Ω |
Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height | 750μm |
Length | 3mm |
Width | 3mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
FPF2702MPX Description
The FPF2702MPX is a series of current-limit load switches that safeguard systems and loads from excessive current circumstances. The minimum current limit can be set anywhere between 0.4 and 2.0 amps. To prevent power bus disturbances caused by "hot plugging" loads or transient excess load demands, the FPF270X includes a slew-rate-controlled N-channel MOSFET and slew-rated turn-on. The input voltage ranges from 2.8 to 36 volts. An ON pin that is compatible with low-voltage logic can be used to activate or deactivate loads. The error flag pin and/or the power-good pin can be used to monitor fault circumstances.
FPF2702MPX Features
2.8V to 36V Input Voltage Range
Typical RDS(ON)=88m
0.4A to 2A Adjustable Current Limit (Min.)
Slew Rate Controlled
ESD Protected, above 2000V HBM
Thermal Shutdown
Active LOW Enable
UVLO Protection
Power-Good Output
FPF2702MPX Applications
Motor Drives
Digital Cameras
Consumer Electronics
Industrial Computing
Hard Disk Drives
Telecom Equipment
Products