FS6370-01G-XTD

FS6370-01G-XTD Overview

A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. There is a clock generator embedded in the 16-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result of this, we can find 16 terminations. Basically, a voltage of 5V should be applied to this electronic frequency generator. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 230MHz is available. Surface Mount-slots make it easy to mount this electronic component on panels. In terms of supply voltage, RF synthesizer works with 3V~5.5V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. CMOS is designed for clock generator's output. It is possible to classify this electronic component as a PLL Clock Generator. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. According to the base part number FS6370, its related parts can be found. There are 16 pins that are available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. The device is usually classified as a type of Clock Generators device. It is able to realize high efficiency when operating at a frequency of 27MHz. For the time clock generator to operate properly, 43mA of supply current are required. This is a 3-element clock generator with low jitter performance. This RF synthesizer operation requires a maximum current of 43mA.

FS6370-01G-XTD Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 5V
Operating supply voltage of 3.3V

FS6370-01G-XTD Applications

There are a lot of ON Semiconductor FS6370-01G-XTD Clock Generators applications.

• Set-top boxes
• Antenna automatic tracking
• Digital logic circuits
• Jitter reduction
• Automatic control
• Electronic countermeasures
• Clock recovery
• Mixed mode (analog and digital) applications
• Microprocessor clock multipliers
• Pulsed digital systems