FST3125MTC

FST3125MTC Overview

Due to the lack of space on the board, digital switch is provided in the 14-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.Among its basic configurations are 14 terminations.As its base part number is 3125, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.As a result, GULL WING represents the end of the conductors.There is a type of supply Single that is employed in this case.The board is configured with 14 pins.Surface Mount is the way it is mounted.In the CBT/FST/QS/5C/B family, the logic switch is included.There are 1 bits in signal multiplexer.Keep Vsup at 4V to avoid unnecessary failures.No external influence consumes 3μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.The system operates with a resistance of 11Ohm.In the turn signal switch's circuit, there are 4 channels used for transmission.

FST3125MTC Features

Supplied in the 14-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V

FST3125MTC Applications

There are a lot of ON Semiconductor FST3125MTC Signal Switches / Multiplexers / Decoders applications.

• Logic gates for other digital devices
• Code conversion
• Frequency multiplexing system
• PCIe
• Video transmission
• Data communication
• Electronics industry
• Arithmetic Logic Units
• Decimal decoder
• Injectors