GAL16V8D-15LPN

GAL16V8D-15LPN Overview

Currently, there are 8 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 20-DIP (0.300, 7.62mm)package, you will find it.There are 8 I/Os on the board.There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 5V.This part is in the family [0].The chip should be packaged by Bulk.A reliable operation is ensured by the operating temperature of [0].It is mounted in the way of Through Hole.This type of FPGA is a part of the GAL?16V8 series.There are 20 pins on the chip.In accordance with the [0], its related parts are listed.A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, Through Holeis used to mount the electronic component.The device has a pinout of [0].With a maximum supply voltage of [0], it operates.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.The system runs on a power supply of 5V watts.There is 62.5MHz frequency that can be achieved.To detect input signals, there are 8 dedicated inputs.A 8output is configured for this device.The product has 64 product terms.There is a maximum current supplied for its operation of 90mA.

GAL16V8D-15LPN Features

20-DIP (0.300, 7.62mm) package
8 I/Os
The operating temperature of 0°C~75°C TA
20 pin count
20 pins
5V power supplies
8 outputs

GAL16V8D-15LPN Applications

There are a lot of Lattice Semiconductor Corporation GAL16V8D-15LPN CPLDs applications.

• Reset swapping
• Software-driven hardware configuration
• Software Configuration of Add-In Boards
• Power automation
• POWER-SAVING MODES
• Pattern recognition
• Software-Driven Hardware Configuration
• Digital multiplexers
• INTERRUPT SYSTEM
• Cross-Matrix Switch