GAL20RA10B-10LP

GAL20RA10B-10LP Overview

There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 24-DIP (0.300, 7.62mm) package.There are 10 I/Os on the board.It is programmed to terminate devices at [0].This electrical part is wired with a terminal position of DUAL.The power source is powered by 5Vvolts.This part is in the family [0].It is recommended to package the chip by Tube.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Through Hole.The GAL?20RA10series FPGA is one of these types.There are 24pins on the chip.It is also possible to find REGISTER PRELOAD; POWER-UP RESETwhen using this device.According to the GAL20RA10, its related parts can be found.In order to achieve high efficiency, the supply voltage should be maintained at [0].Through Holeis the mounting point of this electronic part.There are 24pins on it.This device operates at a voltage of 5.25Vas its maximum supply voltage.Initially, it requires a voltage of 4.75Vas the minimum supply voltage.The system runs on a power supply of 5V watts.This frequency is 71.4MHz.To detect input signals, there are 10 dedicated inputs.This device is configured to output [0].The product is equipped with 80terms.

GAL20RA10B-10LP Features

24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs

GAL20RA10B-10LP Applications

There are a lot of Lattice Semiconductor Corporation GAL20RA10B-10LP CPLDs applications.

• LED Lighting systems
• Address decoding
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Synchronous or asynchronous mode
• Multiple DIP Switch Replacement
• Field programmable gate
• State machine control
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Programmable power management
• INTERRUPT SYSTEM