GAL20V8C-10LJN

GAL20V8C-10LJN Overview

Currently, there are 8 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is part of the 28-LCC (J-Lead) package.There are 8 I/Os programmed in it.There is a 28terminations set on devices.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It belongs to the family [0].Tubeshould be used for packaging the chip.Ensure its reliability by operating at [0].It is recommended that the chip be mounted by Surface Mount.The FPGA belongs to the GAL?20V8 series.The chip is programmed with 28 pins.This device can also display [0].The GAL20V8indicates that related parts can be found.Optimal efficiency requires a supply voltage of [0].The electronic part is mounted by Surface Mount.The 28pins are designed into the board.In this case, the maximum supply voltage is 5.25V.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.In order for the device to operate, it requires 5V power supplies.This can be achieved at a frequency of 83.3MHz.Input signals are detected by 12dedicated inputs.There is an output of 8configured on the device.A total of 64product terms are available on it.

GAL20V8C-10LJN Features

28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs

GAL20V8C-10LJN Applications

There are a lot of Lattice Semiconductor Corporation GAL20V8C-10LJN CPLDs applications.

• Portable digital devices
• INTERRUPT SYSTEM
• Complex programmable logic devices
• Wireless Infrastructure Base Band Unit and Remote Radio Unit
• Power automation
• I/O PORTS (MCU MODULE)
• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• I2C BUS INTERFACE
• STANDARD SERIAL INTERFACE UART
• PLC analog input modules