GAL22V10D-15LP

GAL22V10D-15LP Overview

There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 24-DIP (0.300, 7.62mm) package containing it.There are 10 I/Os on the board.There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.An electrical supply voltage of 5V is used to power it.This part is in the family [0].Bulkshould be used to package the chip.A reliable operation is ensured by the operating temperature of [0].Ideally, the chip should be mounted by Through Hole.As part of the GAL?22V10series, it is a type of FPGA.There are 24pins on the chip.Its related parts can be found in the [0].A high level of efficiency can be achieved by maintaining the supply voltage at [0].In this case, it is mounted by Through Hole.A total of 24pins are provided on this board.It operates at a maximum supply voltage of 5.25V volts.With a minimal supply voltage of [0], it operates.A power supply of 5Vvolts is required to operate this device.This can be achieved at a frequency of 83.3MHz.There are 11 dedicated inputs used to detect the status of input signals.The device is configured with an output of [0].There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.

GAL22V10D-15LP Features

24-DIP (0.300, 7.62mm) package
10 I/Os
The operating temperature of 0°C~75°C TA
24 pin count
24 pins
5V power supplies
10 outputs

GAL22V10D-15LP Applications

There are a lot of Lattice Semiconductor Corporation GAL22V10D-15LP CPLDs applications.

• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Software-Driven Hardware Configuration
• Address decoders
• Discrete logic functions
• STANDARD SERIAL INTERFACE UART
• Code converters
• ON-CHIP OSCILLATOR CIRCUIT
• Power Meter SMPS
• Field programmable gate
• INTERRUPT SYSTEM