GAL22V10D-25LJNI

GAL22V10D-25LJNI Overview

There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is embedded in the 28-LCC (J-Lead) package.There are 10 I/Os programmed in it.The device is programmed with 28 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The device is powered by a voltage of 5V volts.This part is part of the family [0].It is packaged in the way of Tube.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The GAL?22V10series comprises this type of FPGA.There are 28 pins on the chip.The GAL22V10can be used to identify its related parts.The supply voltage should be maintained at 5V for high efficiency.Surface Mountis the mounting point of this electronic part.The pins are [0].A maximum supply voltage of 5.5Vis used in its operation.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.In order for the device to operate, it requires 5V power supplies.This frequency can be achieved at 38.5MHz.The status of input signals is detected by 11dedicated inputs.This device is configured with a 10 output.In addition, it contains 132 product terms.

GAL22V10D-25LJNI Features

28-LCC (J-Lead) package
10 I/Os
The operating temperature of -40°C~85°C TA
28 pin count
28 pins
5V power supplies
10 outputs

GAL22V10D-25LJNI Applications

There are a lot of Lattice Semiconductor Corporation GAL22V10D-25LJNI CPLDs applications.

• I/O PORTS (MCU MODULE)
• PULSE WIDTH MODULATION (PWM)
• Storage Cards and Storage Racks
• Reset swapping
• Protection relays
• INTERRUPT SYSTEM
• Power Meter SMPS
• Complex programmable logic devices
• D/T registers and latches
• Network Interface Card (NIC) and Host Bus Adapter (HBA)