HCF4013M013TR

HCF4013M013TR Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 3V~20V volts, it operates. The operating temperature is -55°C~125°C TA. It is an electronic flip flop with the type D-Type. JK flip flop is a part of the 4000series of FPGAs. There should be no greater frequency than 24MHzon its output. It consumes 20μA of quiescent current without being affected by external factors. It has been determined that there have been 14 terminations. The HCF4013 family contains this object. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 5pF farads. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. 2 circuits are used to achieve its superior flexibility. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. Its output current of 6.8mAallows for maximum design flexibility. In order to operate, the chip has 1 output lines.

HCF4013M013TR Features

Tape & Reel (TR) package
4000 series
14 pins

HCF4013M013TR Applications

There are a lot of STMicroelectronics HCF4013M013TR Flip Flops applications.

• Differential Individual
• ESD performance
• Supports Live Insertion
• Shift Registers
• ATE
• Memory
• Modulo – n – counter
• Latch
• Parallel data storage
• Load Control