HCF4027M013TR

HCF4027M013TR Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. The output it is configured with uses Differential. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. A voltage of 3V~20Vis used as the supply voltage. -55°C~125°C TAis the operating temperature. A flip flop of this type is classified as a JK Type. JK flip flop is a part of the 4000series of FPGAs. You should not exceed 24MHzin the output frequency of the device. It consumes 20μA of quiescent It has been determined that there have been 16 terminations. Members of the HCF4027family make up this object. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 5pF farads at the input. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device has the clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. For normal operation, the supply voltage (Vsup) should be kept above 3V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

HCF4027M013TR Features

Tape & Reel (TR) package
4000 series
16 pins

HCF4027M013TR Applications

There are a lot of STMicroelectronics HCF4027M013TR Flip Flops applications.

• Set-reset capability
• Storage Registers
• Shift Registers
• Asynchronous counter
• Balanced 24 mA output drivers
• Automotive
• Cold spare funcion
• Latch-up performance
• Power down protection
• 2 – Bit synchronous counter