HI3-5043-5

HI3-5043-5 Overview

Due to its DIP packaging, the electronic part is convenient for international shipping. In total, there are 16 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. In this multiplexer, the internal resistance is 50Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Analogue multiplexer with a Dual supply type that is cost-effective. The analogue multiplexer could operate on 300μA current. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages of 15V are compatible with the electrical part. The switches should not operate in an environment where the temperature is higher than 75°C. It is capable of carrying out 2-bit operation.

HI3-5043-5 Features

1 Channels
300μA Supply Current
2-Bit

HI3-5043-5 Applications

There are a lot of Intersil (Renesas Electronics America) HI3-5043-5 Analog Switches & Multiplexers ICs applications.

• Sample-and-hold systems
• 65 V DACs
• Relay Replacement
• Intelligent PBX
• Wireless Local Loop
• Sample hold systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Multi-Line E1 Interface Cards
• Fault Tolerant Systems
• Medical systems