ICL7665EPA

ICL7665EPA Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. There is a Tube-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Power management consists of 2 channels, each of which can be used independently. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 240 for the package during reflow. IC management conducts in a 5V-voltage supply. When 2 is applied to the power ic, it conducts. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 8. Power managment ic pin count is 8. IC management can only work with a supply voltage of 1.6V volts. The maximum supply voltage (Vsup) is not to exceed 16V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to ICL7665, which is the base power ics number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. Voltage supervisor can work with a supply temperature of 15μA at the most.

ICL7665EPA Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.6V

ICL7665EPA Applications

There are a lot of Maxim Integrated ICL7665EPA Voltage Supervisors applications.

• Radar
• External alarm
• Household appliances
• Power distribution systems of operating room
• Insulation fault location system
• Detection of phase imbalance
• DSP
• Urban rail transit weak current power monitoring
• Radio
• Smartphones