English

All Products

View All >>
  • INA106U

INA106U

1 Channels 20mA per Channel 86 dB Instrumentational OP Amps ±5V~18V INA106 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-INA106U
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 839
  • Description: 1 Channels 20mA per Channel 86 dB Instrumentational OP Amps ±5V~18V INA106 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Resistance 110kOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 15V
Base Part Number INA106
Pin Count 8
Number of Channels 1
Operating Supply Current 1.5mA
Nominal Supply Current 2mA
Quiescent Current 1.5mA
Min Input Voltage 4V
Slew Rate 3V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 86 dB
Max Input Voltage -4V
Voltage - Supply, Single/Dual (±) ±5V~18V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 200μV
Bandwidth 5MHz
Neg Supply Voltage-Nom (Vsup) -15V
Voltage Gain 20dB
Low-Offset YES
Frequency Compensation YES
Voltage - Input Offset 50μV
Micropower NO
-3db Bandwidth 1MHz
Programmable Power NO
Dual Supply Voltage 15V
Power NO
Voltage Gain-Nom 10
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount

INA106U Overview


In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Differential-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. It consists of a total of 8 pins in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 1.5mA and 10 . There should be no change in the voltage gain at 20dB. On the buffer amps, there are 1 channels that can be used. The quiescent current is 1.5mA. 110kOhm should be the range of resistance for the linear amplifier.

INA106U Features


8 Pins
supply voltage of 15V
20dB voltage gain
Resistance of 110kOhm

INA106U Applications


There are a lot of Texas Instruments INA106U Instrumentational OP Amps applications.

  • Mobile phone
  • Navigation
  • Medical imaging
  • Computer workstations
  • Signal transformation
  • Digital cameras
  • Vehicle electronics
  • Image computer boards
  • Differentiator circuits
  • Car stereo