INA169NA/250

INA169NA/250 Overview

Buck boost converter is included in the package Cut Tape (CT).SC-74A, SOT-753 has packaged voltage regulator in this manner.Current regulator is mounted by Surface Mount.As a rule of thumb, the operating temperature should not exceed -40°C~85°C.The input voltage of 2.7V~60V is supported as an input voltage.An example of this is the 5 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to the family INA169.5-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.The current regulator is mounted on the Surface Mount axis.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.Supports the maximum supply voltage of 60V.In this case, these current regulations are included as part of a part called Operational Amplifier.In order for it to operate, 2.7V has to be the minimum supply voltage.This electrical buck boost converter has a INSTRUMENTATION AMPLIFIER amplifier type.When 125μA reaches, it receives its operating supply current.Basically, current regulation is made up of 1 elements.In order to ensure high efficiency, the supply voltage should be maintained at 28V.With 60V's maximum input voltage, it is design power convertered to provide maximum design power converter flexibility.2.7V's minimal input voltage allows for maximum design flexibility.

INA169NA/250 Features

Cut Tape (CT) package
INA169 family
The maximal supply voltage of 60V
1 elements

INA169NA/250 Applications

There are a lot of Texas Instruments INA169NA/250 Current Regulation/Managements applications.

• Vehicle dynamic controls
• Engine management
• Current sensing
• Power supply current measurement
• DC motor control
• Power management
• Industrial applications current measurement
• Transmission controls
• Motor controls
• Over-current protection