INA199A1DCKT

INA199A1DCKT Overview

Package Tape & Reel (TR) includes buck boost converter.In this case, voltage regulator has been packaged in the same way as 6-TSSOP, SC-88, SOT-363.Current regulator is mounted by Surface Mount.There should be a limcurrent regulator to the operating temperature of -40°C~125°C.Voltages of -0.3V~26V can be input as input voltages in this module.6 terminations are a standard way of terminating transmission lines, in which a voltage regulator is used that matches the characteristic impedance of the line in order to terminate the transmission line.There are two types of INA199s in this family.There are 6 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. This electronic part is mounted in the way of Surface Mount.The supply voltage of this electrical constant current is 5V.The analog IC used by this power converter is called POWER SUPPLY SUPPORT CIRCUIT.In terms of channel number, I would say that it is growing strongly/weakly: 1.The maximum voltage of 26V that can be supplied to the buck boost converter is supported.In order to operate, it must be powered by a minimum voltage of 2.5V.When 65μA reaches, it receives its operating supply current.A maximum current supply (Isup) is supplied for its operation when the boost converter reaches its limit (5mA).There are 1 elements in current regulation.33.98dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.

INA199A1DCKT Features

Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements

INA199A1DCKT Applications

There are a lot of Texas Instruments INA199A1DCKT Current Regulation/Managements applications.

• Level translating
• Motor controls
• Power management
• Industrial applications current measurement
• Over-current measurement
• Diesel injection controls
• Current sensing
• Programmable current source
• DC motor control
• Power supply current measurement