INA216A1RSWR

INA216A1RSWR Overview

Included in package Cut Tape (CT) is this file.oltage regulator is packaged in such a way that 10-UFQFN would understand.Surface Mount is used to mount this current regulator on the board.In order to maintain a safe operating environment, the temperature cannot exceed -40°C~125°C.Voltages of 1.8V~5.5V can be input as input voltages in this module.In addition to the 10 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.In the INA216 family, current regulator is a member.When a computer or other communication constant current regulator has 10 pins, these are pronged contacts.The current regulator is mounted on the Surface Mount axis.Channels are becoming stronger/weaker based on the following statistics: 1.As long as 5.5V is supplied with the maximal voltage, the buck boost converter will work.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.A minimum supply voltage of 1.8V is required for its operation.An example of this type of FPGA is the Zero-Drift series.It has an Amplifier type of OPERATIONAL AMPLIFIER.There are 46.02dB voltage gains, which are?the simple ratio of the output voltage to the input voltage of a current regulation.

INA216A1RSWR Features

Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series

INA216A1RSWR Applications

There are a lot of Texas Instruments INA216A1RSWR Current Regulation/Managements applications.

• Current sensing
• Transmission controls
• Smart battery packs
• Over current monitor
• Battery management
• Over-current measurement
• Power management
• Programmable current source
• DC-to-dc converters
• Over current monitor