INA216A4RSWR

INA216A4RSWR Overview

Buck boost converter is part of the package Cut Tape (CT).In this case, voltage regulator has been packaged in the same way as 10-UFQFN.A mounting hole is provided for Surface Mount to mount this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 1.8V~5.5V.A 10 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 10 termination.INA216 family is associated with current regulator.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.The current regulator is mounted on the Surface Mount axis.In terms of channel number, I would say that it is growing strongly/weakly: 1.As long as 5.5V is supplied with the maximum voltage, it is supported.The current regulations of this part are included in a part that is named Operational Amplifier.In order for it to operate, 1.8V has to be the minimum supply voltage.An example of this type of FPGA is the Zero-Drift series.This electrical buck boost converter has a OPERATIONAL AMPLIFIER amplifier type.46.02dB voltage gains are the simple ratios of output voltage to input voltage in a current regulation.

INA216A4RSWR Features

Cut Tape (CT) package
INA216 family
The maximal supply voltage of 5.5V
Zero-Drift series

INA216A4RSWR Applications

There are a lot of Texas Instruments INA216A4RSWR Current Regulation/Managements applications.

• Level translating
• Transmission controls
• Vehicle dynamic controls
• Battery management
• Smart battery packs
• Over current monitor
• Over current monitor
• Engine management
• Industrial applications current measurement
• Suspension controls