INA230AIRGTT

INA230AIRGTT Overview

In package Cut Tape (CT), buck boost converter is included.oltage regulator is packaged in such a way that 16-VFQFN Exposed Pad would understand.There is a Surface Mount mounted on this current regulator.As a rule of thumb, the operating temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of 0V~28V for the input.There are two types of INA230s in this family.Several pronged contacts are used in computer interfaces as 16 pins.Using Surface Mount as a mounting system, this current regulator is mounted.The constant current should work as long as it is powered by a 3.3VV power source, and therefore must be plugged into a 3.3VV outlet.The analog IC used by this power converter is called POWER SUPPLY SUPPORT CIRCUIT.There is a strong/weak growth in the number of channels: 1.As a result, it allows 5.5V to be supplied with its maximum voltage.In this case, these current regulations are included as part of a part called Power Management Circuits.In order to operate, it must be powered by a minimum voltage of 2.7V.This boost converter is supplied with an operating supply current of 420μA for its operation.3.3V power supplies provide power to the boost converter.RESET THRESHOLD VOLTAGE IS 2V is also one of the characteristics of this type.With its maximum supply current, 420μA offers maximum current regulator's design flexibility due to its maximal supply current.

INA230AIRGTT Features

Cut Tape (CT) package
INA230 family
The maximal supply voltage of 5.5V
3.3V power supplies

INA230AIRGTT Applications

There are a lot of Texas Instruments INA230AIRGTT Current Regulation/Managements applications.

• Over current monitor
• Current sensing
• DC motor control
• Industrial applications current measurement
• DC-to-dc converters
• Diesel injection controls
• Programmable current source
• Engine management
• Over-current protection
• Automotive current measurement