All Products

IPS1011PBF

N-Channel PMIC IPS1011PBF 3 Pin TO-220-3


  • Manufacturer: Infineon Technologies
  • Origchip NO: 376-IPS1011PBF
  • Package: TO-220-3
  • Datasheet: -
  • Stock: 693
  • Description: N-Channel PMIC IPS1011PBF 3 Pin TO-220-3 (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case TO-220-3
Number of Pins 3
Supplier Device Package TO-220AB
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Type Switch
Resistance 10mOhm
Max Operating Temperature 150°C
Min Operating Temperature -40°C
Power Rating 25W
Max Power Dissipation 25W
Current Rating 18A
Base Part Number IPS1011PBF
Number of Outputs 1
Output Voltage 28V
Output Type N-Channel
Max Output Current 18A
Operating Supply Voltage 36V
Voltage 5.5V
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Current - Output (Max) 18A
Current 18A
Output Configuration Low Side
Power Dissipation 25W
Output Current 85A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Clamping Voltage 36V
Output Current per Channel 18A
Rise Time 50μs
Drain to Source Voltage (Vdss) 36V
Fall Time (Typ) 70 μs
Nominal Input Voltage 5.5V
Continuous Drain Current (ID) 18A
Ratio - Input:Output 1:1
Voltage - Load 28V Max
Fault Protection Current Limiting (Fixed), Over Temperature
Dual Supply Voltage 28V
Rds On (Typ) 10mOhm
Drain to Source Resistance 10mOhm
Nominal Vgs 1.7 V
Height 16.51mm
Length 10.6426mm
Width 4.82mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

IPS1011PBF Overview


It's?packaged?in?the way?of?a?Tube.This package is included in TO-220-3.This lighting drivere has a mounting type of Through Hole.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of IPS1011PBF.The 3 pins are used for the operation of the system.18AV is the maximum output of the LED driver.The maximum output current drops to 18A in order to meet the operation criteria.The lighting driver is mounted in the way of Through Hole.The LED driver has 10mOhm resistance.As a result, the output current is set to 85A.In order to maximize efficiency, the supply voltage should be set to 36V.The maximum operating temperature of 150°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.A supply voltage of 4.5VV is sufficient for it to work.Electrical components classified as Switch belong to this category.

IPS1011PBF Features


Resistance of 10mOhm

IPS1011PBF Applications


There are a lot of Infineon Technologies IPS1011PBF Power Switches ICs applications.

  • Smartphone and PDA
  • Hot Swap
  • Set-top-box
  • Mobile Communication Devices
  • Solid State Drivers
  • Hot-Swap Systems
  • Storage (HDDs, SSDs)
  • PC Cards
  • HDD, SSD
  • Hot Swaps