English

All Products

View All >>
  • IPS1011SPBF

IPS1011SPBF

N-Channel PMIC IPS1011SPBF 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB


  • Manufacturer: Infineon Technologies
  • Origchip NO: 376-IPS1011SPBF
  • Package: TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
  • Datasheet: -
  • Stock: 338
  • Description: N-Channel PMIC IPS1011SPBF 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-263-3, D2Pak (2 Leads + Tab), TO-263AB
Number of Pins 3
Supplier Device Package D2PAK
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination SMD/SMT
Resistance 10mOhm
Max Operating Temperature 150°C
Min Operating Temperature -40°C
Power Rating 3.1W
Max Power Dissipation 3.1W
Current Rating 18A
Base Part Number IPS1011SPBF
Number of Outputs 1
Output Voltage 28V
Output Type N-Channel
Max Output Current 6.5A
Operating Supply Voltage 5.5V
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Current - Output (Max) 6.5A
Output Configuration Low Side
Power Dissipation 3.1W
Output Current 85A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Clamping Voltage 36V
Output Current per Channel 6.5A
Rise Time 50μs
Drain to Source Voltage (Vdss) 36V
Fall Time (Typ) 70 μs
Nominal Input Voltage 5.5V
Continuous Drain Current (ID) 6.5A
Ratio - Input:Output 1:1
Voltage - Load 28V Max
Fault Protection Current Limiting (Fixed), Over Temperature
Dual Supply Voltage 28V
Rds On (Typ) 10mOhm
Nominal Vgs 1.7 V
Height 4.826mm
Length 10.668mm
Width 9.65mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

IPS1011SPBF Overview


As you can see, it's packaged in the way of a Tube.The TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package contains it.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the family IPS1011SPBF.In order to operate, the 3 pins are used.The maximum output of the LED driving board is 6.5AV.It is necessary to reduce the maximum output current to 6.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 10mOhm ohms.The output current is set to 85A in this case.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.For stable operation, the maximum operating temperature should be 150°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.Supply voltages as low as 4.5VV are possible.

IPS1011SPBF Features


Resistance of 10mOhm

IPS1011SPBF Applications


There are a lot of Infineon Technologies IPS1011SPBF Power Switches ICs applications.

  • Mobile Communication Devices
  • Solid State Drivers
  • USB Ports/Hubs
  • Gaming
  • Notebook and Tablet Computers
  • Wearable Devices
  • Smart Phones, Feature Phones
  • Telecom and Network Systems
  • Portable Devices
  • Solid-State Drives