IR3519STRPBF

IR3519STRPBF Overview

For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.A package of Tape & Reel (TR) has been used.Gate drivers is configured wGate driversh 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.When the supply voltage is set to 6.5V~7.5V, it can demonstrate its superiority.Gate type N-Channel MOSFET is designed for it.In this device, temperatures must not exceed 0°C~150°C TJ.This program uses the input type of Non-Inverting.Under its base part number IR3519SPBF, various related parts can be found.Mosfet driver is mounted using the Surface Mount method.During design, it is configured with 8 pins.The maximum output current can amount to 2A.Maximum (Bootstrap) voltage is 35V.Mosfet driver is based on a basis of 1 outputs that have been integrated.Mosfet gate drivers supports a current output of 2A.150°C is the maximum acceptable operating temperature.Minimum operating temperatures are allowed to be -10°C.In order to ensure greater stability, it is recommended to keep the supply current at 1mA.When the supply voltage is 8V, it is at its maximum operation.A voltage of 7V should be set for the operating supply voltage.By increasing the frequency of 2MHz, efficiency can be improved.

IR3519STRPBF Features

Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 35V

IR3519STRPBF Applications

There are a lot of Infineon Technologies IR3519STRPBF gate drivers applications.

• Head-up and Head mounted displays
• Motor controllers
• Pulse transformer drivers
• Isolated switch mode power supplies (SMPS)
• Isolated Supplies for Motor Control
• Commercial and agricultural vehicles (CAV)
• Motor Controls
• High power buffers
• LCD/LCoS/DLP portable and embedded pico projectors
• Broadcast equipment