IXDD415SI

IXDD415SI Overview

A higher degree of flexibility is achieved by adopting its 28-SOIC (0.295, 7.50mm Width) package.Tube represents the packaging method.The configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.In the absence of a 8V~30V supply voltage, its superiority can be demonstrated.This gate type has a N-Channel, P-Channel MOSFET design.Temperature range -40°C~150°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.Mosfet driver is based on 28 terminations.There are various parts that can be found under its base part number IXD*415.The device is mounted using Surface Mount.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.There are several useful electronic components found in its subcategory of MOSFET Drivers.The board contains 28 pins for component connections.Considering its maximum power dissipation, 1W shows its maximum capacity to transfer and conduct power loss without overheating.In order to operate properly, the operating supply voltage should be set to 15V.

IXDD415SI Features

Embedded in the Tube package
2 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
Maximum power dissipation of 1W

IXDD415SI Applications

There are a lot of IXYS IXDD415SI gate drivers applications.

• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Isolated switch mode power supplies (SMPS)
• Automotive Applications
• 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
• Isolated Gate Driver Supplies
• Commercial air-conditioning (CAC)
• PCMCIA applications
• serial peripheral interface (SPI), I2C
• General Purpose 3-Phase Inverter
• Motor Controls