KA7500CDTF

KA7500CDTF Overview

As a result of 16-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). Voltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. Workable in an dc switcher where -25°C~85°C TA is the -25°C~85°C TArm. In this switching controller, the switch can be set to 1kHz~200kHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Dead Time Control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a DUAL terminal on the switching converters. An array of 16 terminations of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "KA7500", there are other relevant dc to dc converter ics you can find. There are only 16 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. As determined by the test statistics, the output voltage of DC regulator is 5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 250mA. The duty cycle of the voltage regulator dc to dc can be set to 45 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers work at 300kHz Hz. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. Voltage 7V is needed for the supply. A dc switcher can only produce an output current of 250mA. In the presence of a current greater than 10mA, the component may fail to operate properly and may be damaged. There is 10mA nominal current supply for this the controllers dc.

KA7500CDTF Features

Transistor Driver Outputs
Switching Frequency: 1kHz~200kHz
Dead Time Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

KA7500CDTF Applications

There are a lot of ON Semiconductor KA7500CDTF DC to DC converter applications.

• Sensitive electronic devices
• Overvoltage protection circuits in TV sets
• Automation technology
• Magnetohydrodynamic power
• Driver circuits
• Nuclear power plants
• Telecommunications equipment
• Low output voltage switching power supply circuits
• Packaging
• Smart grid