L6710TR

L6710TR Overview

With a 44-TQFP Exposed Pad package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 2 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 7.5V~15V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a 0°C~125°C TJ rating. With this switching controller, you can switch at 150kHz. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Phase Control, Power Good. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at QUAD. 44 terminations with a variety of function. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Other relevant dc to dc converter ics can be found by searching "L6710". In total, switching converter has 44 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It should be noted that the dc to dc regulator only accepts 13.8V voltage as input voltage. The max frequency of the pmic can reach 178kHz. Current is output to the greatest value of 2A. The nominal supply current for this the controllers dc is 12.5mA.

L6710TR Features

Transistor Driver Outputs
Switching Frequency: 150kHz
Current Limit, Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION

L6710TR Applications

There are a lot of STMicroelectronics L6710TR DC to DC converter applications.

• Photovoltaic power
• Ball screw pair
• Hydrogen power
• Digital precision reference circuits
• Television equipment
• Fire elevators
• Smoke prevention equipment
• Geothermal power
• Computed tomography (CT)
• Constant current circuits